Tutorial Wifislax 4.2 Pdf
Tutorial Wifislax 4.2 PDF: Learn the Secrets of Wireless Hacking and Security
Wifislax is a Linux distribution based on Slackware that is specially designed for wireless hacking and security. It contains a variety of tools and applications that can help you test the security of your wireless network, crack passwords, perform network analysis, and more. In this tutorial, you will learn how to use Wifislax 4.2 to perform some common wireless hacking tasks.
tutorial wifislax 4.2 pdf
What is Wifislax 4.2?
Wifislax 4.2 is the latest version of Wifislax, released in July 2012. It has many new features and improvements, such as:
A new kernel (3.4.5) with better support for wireless devices and drivers.
A new graphical interface (KDE 4.8.4) with more options and customization.
A new boot menu with more options and modes.
A new installer that allows you to install Wifislax on your hard drive or USB drive.
A new tool called Wifite that automates the process of cracking wireless networks.
A new tool called Reaver that exploits a vulnerability in WPS (Wi-Fi Protected Setup) to crack WPA/WPA2 passwords.
Many updated tools and applications, such as Aircrack-ng, Wireshark, Nmap, Metasploit, Ettercap, etc.
Wifislax 4.2 can be downloaded from the official website: https://www.wifislax.com/. You can choose between two versions: a full version (1.3 GB) that contains all the tools and applications, or a base version (700 MB) that contains only the essential ones. You can also download a PDF manual that explains how to use Wifislax 4.2 in detail.
How to use Wifislax 4.2?
Wifislax 4.2 can be used as a live CD or a live USB, which means that you don't need to install it on your computer. You just need to burn the ISO image to a CD or a USB drive, and then boot from it. You can also install Wifislax 4.2 on your hard drive or USB drive if you want to save your settings and files.
When you boot from Wifislax 4.2, you will see a boot menu with several options and modes. You can choose between different languages (Spanish, English, French, etc.), different desktop environments (KDE, XFCE, LXDE, etc.), different network configurations (DHCP, static IP, etc.), and different security modes (normal mode, safe mode, forensic mode, etc.). You can also access some advanced options, such as memory test, hardware detection, boot parameters, etc.
Once you choose an option and mode, you will enter the graphical interface of Wifislax 4.2. You will see a desktop with some icons and a panel with some menus and widgets. You can access all the tools and applications from the menu or the icons. You can also customize the appearance and behavior of the desktop according to your preferences.
How to crack wireless networks with Wifislax 4.2?
One of the main features of Wifislax 4.2 is its ability to crack wireless networks with different encryption methods, such as WEP, WPA/WPA2, WPS, etc. There are many tools and applications that can help you with this task, but we will focus on two of them: Wifite and Reaver.
How to use Wifite?
Wifite is a tool that automates the process of cracking wireless networks with different encryption methods. It scans for available networks, selects the best targets, launches attacks against them, and saves the cracked passwords in a file.
To use Wifite, you need to open a terminal and type:
wifite
This will start Wifite with default options. You will see a list of available networks with some information about them: BSSID (MAC address), ESSID (network name), channel, signal strength, encryption method (WEP/WPA/WPS), clients connected (STA), etc.
You can select one or more networks to attack by typing their numbers separated by commas (e.g., 1,3,5) or by pressing Enter to attack all of them. You can also filter the networks by encryption method by typing -wep or -wpa or -wps after wifite.
Once you select the networks to attack, Wifite will launch different attacks depending on the encryption method:
For WEP networks: it will use various techniques to capture enough data packets (IVs) to crack the password with Aircrack-ng.
For WPA/WPA2 networks: it will use various techniques to capture a handshake (a four-way authentication exchange) between a client and an access point (AP), and then try to crack the password with Aircrack-ng or an online service (Pyrit or CloudCracker).
For WPS networks: it will use Reaver to exploit a vulnerability in WPS (Wi-Fi Protected Setup) that allows it to recover the PIN code and then the password of the network.
Wifite will show you the progress and status of each attack: data packets captured (DATA), handshake captured (WPA), PIN code recovered (WPS), password cracked (CRACKED), etc.
When Wifite finishes cracking a network's password
, it will save it in a file called cracked.txt in the same directory where you ran Wifite. You can open this file to see the passwords of the cracked networks.
Wifite is a very powerful and easy-to-use tool that can crack many wireless networks in a short time. However, it also has some limitations and drawbacks, such as:
It depends on the availability and vulnerability of the networks and clients. If there are no networks or clients in range, or if they are not vulnerable to any of the attacks, Wifite will not be able to crack them.
It depends on the strength and complexity of the passwords. If the passwords are very long or complex, Wifite may take a long time or fail to crack them.
It may cause some interference or damage to the networks and clients. By launching attacks against them, Wifite may disrupt their normal functioning or even cause them to crash or disconnect.
Therefore, you should use Wifite with caution and responsibility, and only for educational or ethical purposes.
How to use Reaver?
Reaver is a tool that exploits a vulnerability in WPS (Wi-Fi Protected Setup) to recover the PIN code and then the password of a wireless network. WPS is a feature that allows users to connect to a wireless network by pressing a button on the router or entering a PIN code on a device. However, this feature also has a flaw that allows an attacker to guess the PIN code by trying different combinations and receiving feedback from the router.
To use Reaver, you need to open a terminal and type:
reaver -i -b
where is the name of your wireless interface (e.g., wlan0) and is the MAC address of the target network (e.g., 00:11:22:33:44:55).
This will start Reaver with default options. You will see some information about the target network: ESSID (network name), channel, signal strength, WPS version, etc.
Reaver will then start trying different PIN codes and sending them to the router. You will see the progress and status of each attempt: PIN tested (PIN), percentage completed (%), signal strength (dBm), elapsed time (Time), estimated remaining time (Remaining), last state (State), etc.
The state can be one of the following:
No response: The router did not respond to the PIN attempt.
NACK: The router responded with a negative acknowledgement, meaning that the PIN was incorrect.
M1/M2/M3/M4/M5/M6/M7/M8: The router responded with a message exchange, meaning that part or all of the PIN was correct.
PKE/PKR/PKH/AuthKey/E-Hash1/E-Hash2/E-Nonce/R-Nonce/R-Hash1/R-Hash2/WPS-PSK: The router responded with some cryptographic data, meaning that Reaver has recovered the PIN and is trying to get the password.
When Reaver finishes recovering the PIN and password of the network, it will show them on the screen and save them in a file called .wpc in /usr/local/etc/reaver. You can open this file to see the PIN and password of the network.
Reaver is a very effective and fast tool that can crack many WPS-enabled networks in a few hours or minutes. However, it also has some limitations and drawbacks, such as:
It only works on WPS-enabled networks. If the network does not have WPS enabled or supported, Reaver will not be able to crack it.
It may trigger some countermeasures or alerts on the router. Some routers have features that detect WPS attacks and block them by locking or disabling WPS, changing the PIN code, sending notifications to the administrator, etc.
It may cause some interference or damage to the network and clients. By sending many PIN attempts to the router, Reaver may overload its resources or cause it to crash or disconnect.
Therefore, you should use Reaver with caution and responsibility, and only for educational or ethical purposes.
Conclusion
Wifislax 4.2 is a powerful and versatile Linux distribution that can help you learn and practice wireless hacking and security. It contains many tools and applications that can help you scan, analyze, attack, and crack wireless networks with different encryption methods. In this tutorial, you learned how to use Wifislax 4.2 to perform some common wireless hacking tasks with Wifite and Reaver.
However, you should also be aware of the limitations and drawbacks of these tools, and the ethical and legal implications of using them. You should only use Wifislax 4.2 for educational or ethical purposes, and with the permission of the network owners or administrators. You should not use Wifislax 4.2 to harm or damage any network or device, or to steal or misuse any data or information.
We hope that this tutorial was useful and interesting for you, and that you learned something new and valuable. If you want to learn more about Wifislax 4.2 and wireless hacking and security, you can visit the official website of Wifislax: https://www.wifislax.com/, where you can find more information, documentation, tutorials, forums, etc.
Thank you for reading this tutorial, and happy hacking!
Conclusion
. Do you want me to rewrite it or add something to it? d282676c82
https://www.supershop.com.co/group/guess-lovers-40/discussion/b14ae30d-f89a-44de-ad16-d356412a788c