Note that I have included a warning in the code, just in case you are using the serial numbers with the serial monitor. You should see the serial numbers in the serial monitor (the serial numbers are added in a list), but you might want to be careful when using serial numbers.
I have uploaded my code on github https://github.com/mlabon/esp32-arduino-esp32_v126.96.36.199/tree/master/esp_streamerI have tested this on ESP32 A1 and ESP32 A2 and it seems to work on other boards. I have also tested on Windows OS, Linux OS, MAC OS. I also tested it using the serial windows and it seems to work. If you are interested in using it, just add serial numbers to the cell and then click the button to stream the serial numbers.
J-Link also has the option of further software enhancements with the production flash programming utility (J-Flash). The ability to take full advantage of the development environment using the Unlimited Flash Breakpoint module also means you free your development from the hardware breakpoint restriction. In this test, J-Link is the clear winner.
The serial connection with the ESP32 is lost whenever the ESP32 is reset by hard reset (held down button of the ESP32 for more than 10 secs), or the ESP32 is powered off. The ESP32 is read-only, so the serial connection can only be used to upload firmware. After uploading the firmware, the serial connection can be used to download firmware and do other things while the ESP32 is being powered on.
In the mean time, I also have another version (1.7.0) of J-Flash is here! It's still in beta testing, and I would need all your help to make it a stable product. If you need any help, just let me know. After all the debugging, J-Flash is available now!
Hi,I've been trying to use the J-Link hardware ISP to upload code to an ESP32 via a browser window but there seems to be a problem. I have a website with a button that triggers a recording, but the serial monitor doesn't show anything when the button is pressed. I also tried using the J-Link as a programmer, but I can only get the LED's to blink, but the ESP32 doesn't seem to do anything.
J-Flash is full of features for changing the attributes of your serial numbers. J-Flash can also control serial numbers, program them, download them into the target, and even change their values. In addition to that, J-Flash allows you to create and download the serial numbers on the fly. 827ec27edc